Review of Della Wallet Clutch

This is the Della Wallet Clutch from Swoon Patterns.
What sparked my interest was a youtube video posted on how to construct this wallet.

It's an easy-sew wallet utilizing two squarish rectangles which you sew separately and then put them right-sides-together (RST) and sew and turn. They are then folded in half to create the clutch.

You add your card slots, side flaps and handle fob before you sew RST together.

I was also smitten with these two zipper pockets. In the video, they are the same color which would never ever work for me so I used an orange and a blue zipper to differentiate the zip pockets.
These pockets are big enough to put your phone in.

Backside

I sewed the wrist strap as directed. Well --- actually,  I never bought this pattern.
I watched the video and approximated the size of the rectangles and card slots measurements.
I noted what I wanted to do differently and sewed it my way.

The card slots went towards the middle. This clutch's strap hangs from the bottom - or is that the top? The zip pockets look like the top to me so I changed the card slots placement to be reachable from the top instead of down towards the middle. Possibly a little OCD here.
 
I thought about making each card slot section a different color as well (like the zippers)  but then I cut the fabric and sewed it up, split it in the middle and added a middle section and I was fine with that.

I thought a pen holder case would be nice to put into the middle and that turned out to be a very nice addition.

There are four card slots on each half with the top pocket the full width of the wallet. For cash money or your check register.

The side tabs latch on with magnetic snaps to this strip of blue bubble fabric. Opportunity to 'decorate' is there before you sew it all together. I fussy cut a 'label' from my outer fabric to break up the strip.

I cut the outer fabric in half and re-sewed it together as I had a directional print. You want this wallet to fold easily in half so this seam was top-stitched down.

So now I have my card pockets all hanging down towards the open bottom and no way to keep items securely inside the purse. Which is why the actual directions have you put your cards slots towards the middle - for security.
Me - I always gotta go my own way. I added a snap to help with security. If clutch is dangled, then this should help keep things inside.

My gingham pockets inside the zippered areas are loose by the zipper teeth area. I sewed one side down by hand and tried to decide if a good pressing would be enough on the other side or if I needed to handsew that down too.

Looks like the top to me even though wrist straps turns this downwards. Those card/cash pockets are now easy to reach into, although not very secure.

That whole two halves open on one end is a deal breaker for me. Even if sewn as directed with pockets to the middle, the card pockets are loose and not secure enough for me.
I felt challenged to see if I could sew this without shelling out for a pattern and it is an easy sew even with my additions.

Things I changed:
1. allowed for directional fabric
2. zippers - two colors.
3. Card pocket directional (180') change.
4. Pen holder
5. Snap on open end.

Things I would do differently next time:
1. Make card pockets tighter - too much room side to side. Maybe place them horizontally instead of vertically so strap helps hold cards securely.
2. Add two magnetic snaps on open end (more secure).
3. Handsew pocket linings down so they don't bunch at zipper teeth.

The majority of materials used came from Japan. I love this Airport fabric and the blue bubbles was also bought in Japan. One of the zippers was as well. The snap, magnetic closure and swivel clip came from stash. The D-ring came from Japan. Gingham pocket linings from stash. Zipper pulls from stash.

This clutch might work for traveling with one pocket for change and one for phone. With the right security work done.
It's small and compact - about 8" long by 4.5" high.